Mount Thermostat And Outdoor Sensor - Honeywell redlink Installation Manual

Mount thermostat & outdoor sensor
5
3/16" holes for drywal
7/32" holes for plaster
Wall anchor
Detach wallplate
Outdoor sensor (optional)
To check location before mounting: Restore ther-
mostat Home screen, then hold the sensor where
you intend to install it and press the
sensor is working properly, thermostat will switch to
display outdoor temperature and humidity.
Français : voir la page 17 • Español: vea la página 32
Wallplate
Mount the sensor on a
vertical exterior wall,
at least 6 inches below
any overhang. Choose a
location protected from
direct sunlight.
Place sensor securely
in bracket, facing away
M28491
button. If
connect
11
Mounting screw
from wall
Press and release
M28490
69-2090EFS—07