Download Print this page
Smeg S9GMXU Installation Instructions Manual

Smeg S9GMXU Installation Instructions Manual

Hide thumbs Also See for S9GMXU:

Advertisement

Table of Contents - Important Safety Instructions
1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4
2. DIMENSION REQUIREMENTS ............................................................................................... 7
3. UNPACKING, MOVING AND POSITIONING THE RANGE .................................................... 9
4. WALL ATTACHMENT AND THE ANTI-TIP DEVICE ............................................................ 10
5. ELECTRICAL REQUIREMENTS ........................................................................................... 14
6. GAS SUPPLY REQUIREMENTS .......................................................................................... 17
WARNING:
precisely, fire or explosion may result causing property damage, personal
injury or loss of life.
- Do not store or use gasoline or other flammable vapors or liquids near this
or any other appliance.
• Do not try to light any appliance.
• Do not touch any electrical switches.
• Do not use any telephones in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service
agency or gas supplier.
NOTE: THIS APPLIANCE MUST BE INSTALLED SOLELY AND EXCLUSIVELY BY A QUALIFIED
TECHNICIAN. ANY TECHNICAL PROCEDURES MUST BE CARRIED OUT BY AN AUTHORIZED
TECHNICIAN.
INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified technician who must install
the appliance, set it functioning and carry out an inspection test.
If the instructions contained in this manual are not followed
WHAT TO DO IF YOU SMELL GAS
3

Advertisement

loading

Summary of Contents for Smeg S9GMXU

  • Page 1: Table Of Contents

    Table of Contents - Important Safety Instructions 1. IMPORTANT SAFETY INSTRUCTIONS ................. 4 2. DIMENSION REQUIREMENTS ....................7 3. UNPACKING, MOVING AND POSITIONING THE RANGE ............ 9 4. WALL ATTACHMENT AND THE ANTI-TIP DEVICE ............10 5. ELECTRICAL REQUIREMENTS ................... 14 6.
  • Page 2: Important Safety Instructions

    Important Safety Instructions 1. IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS – Your safety and the safety of others are very important. We have provided many important safety messages throughout this manual and on the appliance. Read all the instructions before using the appliance and always obey all safety messages. RECOGNIZE SAFETY INFORMATION This is a safety alert symbol.
  • Page 3 Important Safety Instructions TIP OVER HAZARD A child or adult can tip the range and be killed. Make sure that the anti-tip device has been properly installed and WARNING engaged. The wall-mounted brackets should anchor the sides of the range (primary system) or, in case of floor-mounted brackets, they should anchor the rear of the range to the ground.
  • Page 4 Important Safety Instructions ELECTRICAL GROUNDING REQUIRED: See the “Electrical Requirements” section. It is the customer’s responsibility: 1 To contact a qualified electrician to install the appliance 2 To ensure that the electrical system is adequate and conforms with the national ANSI / NFPA 70 ELECTRICAL CODE –...
  • Page 5: Dimension Requirements

    MODEL 900 mm 216 mm 900 mm 150 mm 636 mm 457 mm 610 mm 330 mm S9GMXU 25 “ 18 “ 24 “ 13 “ ” ” ” ” 1 min. when bottom of wood or metal cabinet is protected by not less than ¼” (0.64 cm) flame retardant millboard covered with not less than No.
  • Page 6 Instructions for the installer 2.1 Product dimensions Overall dimensions: location of electrical connection points. 46 mm - 1 ” 660 mm - 25 “ 124 mm - 4 ” 41 mm - 1 ” Check the location where the range is to be installed. The range should be positioned for convenient access in the kitchen.
  • Page 7: Unpacking, Moving And Positioning The Range

    Instructions for the installer 3. UNPACKING, MOVING AND POSITIONING THE RANGE CAUTION: This unit is designed as a cooking appliance. For safety purposes, never use it for warming the room or as a space heater. It is recommended that the grates, the griddle plate and burner heads, burner caps, front kick panel and oven racks be removed to facilitate handling.
  • Page 8: Wall Attachment And The Anti-Tip Device

    Instructions for the installer 4. WALL ATTACHMENT AND THE ANTI-TIP DEVICE TIP OVER HAZARD A child or adult can tip the range and be killed. Make sure that the anti-tip device has been properly installed and WARNING engaged. The wall-mounted brackets should anchor the sides of the range (primary system) or, in case of floor-mounted brackets, they should anchor the rear of the range to the ground.
  • Page 9 Instructions for the installer 4.1 Instructions for wall mounting (primary system) The anti-tip brackets are to be attached to the rear wall as shown. The height of bracket location from the floor is determined after the range legs have been adjusted to the installation height as shown in the installation instructions and the range has been leveled.
  • Page 10 Instructions for the installer (Front view) 4 Correctly position the range so that the two screws perfectly align with the anti-tip brackets on the range.
  • Page 11 Instructions for the installer 4.2 Instructions for floor mounting (secondary system) The secondary anti-tip device is to be attached to the floor when it is not possible to install the primary system. After having positioned and leveled the appliance the bracket has to be anchored to the floor and engaged in the slots at the rear of the appliance.
  • Page 12: Electrical Requirements

    Instructions for the installer 5. ELECTRICAL REQUIREMENTS ELECTRICAL GROUNDING INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Frame grounded by connection of grounding lead to neutral lead. If used in a mobile home or if local codes do not permit grounding through neutral, open connection and use grounding lead to ground unit in accordance with local codes.
  • Page 13 Instructions for the installer WARNING ELECTRICAL SHOCK HAZARD Turn power supply off before connecting wires. WARNING Electrically ground the range. Failure to follow these instructions can result in loss of life, fire, or electrical shock. Improperly connecting the appliance grounding conductor can result in a risk of electrical shock.
  • Page 14 Instructions for the installer 5.3 U.S. and Canada installation/ 4-wire branch circuit Refer to Figure 2, Separate the green or yellow-green wires from the white wires that extend out of the end of the appliance cable. The ground wire must be connected first; Connect the green or yellow-green ground wire from the appliance to the ground wire in the junction box (green colored wire) using UL/CSA...
  • Page 15: Gas Supply Requirements

    Instructions for the installer 6. GAS SUPPLY REQUIREMENTS EXPLOSION HAZARD Use a new AGA or CSA-approved gas supply line. Install a shut-off valve. WARNING Securely tighten all gas connections. lf connected to LP, have a qualified technician ensure that the gas pressure does not exceed a 14"...
  • Page 16 Instructions for the installer The supply line must be fitted with an approved shut-off valve. This valve should be located in the same room as the cooktop and should be in a location where it can be easily opened and closed.