Maintenance - Makita 6821 Instruction Manual

Operation (Fig. 8)
Fit the screw on the point of the bit and place the point
of the screw on the surface of the workpiece to be
fastened. Apply presssure to the machine and start it.
Withdraw the machine as soon as the clutch cuts in.
Then release the trigger.
CAUTION:
• When fitting the screw onto the point of the bit, be
careful not to push in on the screw. If the screw is
pushed in, the clutch will engage and the screw will
rotate suddenly. This could damage a workpeice or
cause an injury.
• Make sure that the bit is inserted straight in the
screw head, or the screw and/or bit may be dam-
aged.
• Do not continue unnecessary clutching operation.
4

MAINTENANCE

CAUTION:
Always be sure that the machine is switched off and
unplugged before carrying out any work on the
machine.
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by
Makita Authorized Service Center.