Specifications; Safety Warnings; Explanation Of General View; Power Supply - Makita 9561CVH Instruction Manual

ENGLISH
(Original instructions)
1 Shaft lock
2 Slide switch
3 Speed adjusting dial
4 Wheel guard
5 Bearing box
6 Screw
7 Lever
8 Lock nut

SPECIFICATIONS

Model
Depressed center wheel diameter
Spindle thread
Rated speed (n) / No load speed (n
Overall length
Net weight
Safety class
Model
Depressed center wheel diameter
Spindle thread
Rated speed (n) / No load speed (n
Overall length
Net weight
Safety class
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.

Explanation of general view

9 Depressed center grinding
wheel/Multi-disc
10 Inner flange
11 Lock nut wrench
12 Marking A
13 Marking B
14 Marking C
15 Pin
9561CH 9562CH
115 mm 125 mm
M14 M14
)
0
289 mm
2.1 kg 2.3 kg
9561CVH 9562CVH
115 mm 125 mm
M14 M14
) 2,800 – 12,000 min
0
289 mm
2.2 kg 2.3 kg
ENE048-1
ENF002-2
GEA010-1
16 Vent
17 Abrasive cut-off wheel/diamond
18 Wheel guard for abrasive cut-off
19 Exhaust vent
20 Inhalation vent
9563C
100 mm
M10
–1
12,000 min
2.1 kg
/II
9564CV
115 mm
M14
–1
299 mm
2.4 kg
/II
GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding,
Wire Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read
all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
2. Operations such as polishing are not recom-
mended to be performed with this power tool.
Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
3. Do not use accessories which are not specifi-
cally designed and recommended by the tool
manufacturer. Just because the accessory can be
attached to your power tool, it does not assure safe
operation.
4. The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool. Accessories running faster than
their rated speed can break and fly apart.
wheel
wheel/diamond wheel
9564C 9565C
115 mm 125 mm
M14 M14
299 mm
2.4 kg 2.3 kg
9565CV
125 mm
M14
2.4 kg
GEB033-5
5