SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function
on the tool.
Switch action
003282
CAUTION:
Before plugging in the tool, always check to see
•
that the tool is switched off.
Switch can be locked in "ON" position for ease of
•
operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
To start the tool, slide the switch to the "ON ( I )" position.
To stop the tool, slide the switch to the "OFF (O)"
position.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the
tool.
Installing or removing abrasive paper
003304
To install the abrasive paper, pull out the clamp lever to
open the paper clamp. Insert the paper end into the
clamp. Center the paper and align the edges parallel to
the pad, then return the clamp lever to secure the paper.
(Prebending paper makes attachment easier.)
Repeat the same process for the other end of the base,
maintaining the proper paper tension.
4
1. Switch
1
1. Paper clamp
2. Clamp lever
1
2