Hitachi compute blade 500 series Getting Started Manual page 57

Item
User ID
Password
Input admin as the user ID, and then press Enter.
Input <password>, and then press Enter.
Changing password
Change the password for the admin user ID.
1 Navigate to the system administrator mode, input passwd admin, and
.
then press Enter.
2 Change the system administrator password, input <old password>, and
.
then press Enter.
3 Input <new password>, and then press Enter.
.
4 Input <new password> again for confirmation, and then press Enter.
.
Hitachi Compute Blade 500 Series Getting Started Guide
Table 2-8 Factory default setting
Factory default setting
admin
password
Initial setup
2-33