Restoring The Internal Hard Disk To The Factory-Set Condition - Yamaha AW-2400 Service Manual

RESTORING THE INTERNAL HARD DISK TO THE FACTORY-SET CONDITION

In order to restore the internal hard disk to the factory-set
condition, you will need to perform the following two pro-
cedures.
q Initialize the internal hard disk
w Load the demo song
Initializing the internal hard disk
The UTILITY screen Format page lets you initialize the
internal hard disk.
Prior to exporting and importing WAV files to or from a
Macintosh computer (Mac OS X 10.3) it may be
necessary to initialize the hard disk in order to change
the hard disk cluster size.
When you initialize the internal hard disk, the system
settings will return to their factory-set state.
NOTE
• Executing the Format operation will erase all data from
the internal hard disk, and the data cannot be recovered.
We recommend that you backup all data on the internal
hard disk to a computer before executing the Format
operation.
• You cannot abort the Format operation once it has been
started.
• Never turn off or disconnect the power during formatting,
since this may damage the hard disk and cause
malfunctions.
To call this page press the Work Navigate section [UTILITY]
key as many times as necessary, or press the [F3] key after
pressing the [UTILITY] key.
q CLUSTER field
Set the disk cluster size to either 32K or 64K.
If you will be using Mac OS X 10.3 for WAV file transfer
operations, set the cluster size to 32K. Select the 64K cluster
size for maximum speed if you will be using Windows, or
Mac OS X 10.4 or higher. When the AW2400 is shipped
from the factory, the cluster size is set to 64K.
q
w
w EXECUTE button
Execute the disk initialization. A popup window will show
the progress of the initialization operation.
The popup window will close when initialization has been
completed.
Loading the demo song
You can load the demo song from the included CD-ROM to
restore the AW2400 to its factory-set condition.
1
Insert the included CD-ROM into the CD-RW drive
of the AW2400.
2
Call the SONG screen Restore page by either
pressing the Work Navigate section [SONG] key as
many times as necessary.
3
Make sure that the cursor is located at the READ
CD INFO button, and press the [ENTER] key.
Loading from the CD-ROM will begin. When loading is
finished, the contents of the display will change as
follows.
4
Move the cursor to the list and press the [ENTER]
key.
The symbol at the left of the list will change to " "
5
Move the cursor to the RESTORE button and press
the [ENTER] key.
6
A popup window will ask you for confirmation, so
move the cursor to the OK button or CANCEL button,
and press the [ENTER] key.
While the Restore operation is being executed, the state
of progress will be shown in a popup window.
When this popup window closes, the operation has been
completed.
AW2400
95