30.
Hard Disk Drive Unit
Turn the Tyros3's power off, disconnect any cables including
AC power cord from the keyboard.
Also make sure to close the LCD panel and disconnect a
USB device from the USB TO DEVICE terminal.
Turn the Tyros3 face down on a blanket or some soft surface,
giving you direct access to the bottom of the instrument.
30-1
Remove the three (3) screws marked [S02C].
(Fig. 1, Fig. 22)
LOWER CASE UNIT
[S02C]: BIND HEAD SCREW 3.0X8 MFZN2B3 (WE983600)
Fig. 22
30-2
Pull out the HDD bracket. (Fig. 23)
HDD BRACKET
Fig. 23
30-3
Remove the four (4) screws marked [S08]. The hard
disk drive unit can then be removed. (Fig. 24)
[S08]
HARD DISK DRIVE UNIT
[S08]: BIND HEAD SCREW 3.0X4 MFNI33 (VG048000)
Fig. 24
[S02C]
HDD BRACKET
Tyros3
23