Installation
Connecting an HDTV — Single Connection for Video/Audio
This section describes steps to connection the DCX to an HDTV using connection
options that combine video and audio into a single cable.
Cable In
Connect an RF coaxial cable to the cable wall outlet and the cable in connector on the
DCX set-top.
HDMI
If the TV has an HDMI input, this is for both audio and video if you are using the TV
speakers. Connect a Standard HDMI cable to the TV and to the HDMI connector on the
DCX set-top.
Figure 4: Connecting an HDTV — Single Connection for Video/Audio
Note: Only (1) HDTV video/audio connection needs to be made to an HDTV.
Note: Solid lines indicate optimum connections.
Note: Optional HDMI connection to A/V Receiver shown but not required.
High-Definition DVR DCX3520e-M • Installation Manual
365-095-22819-x.1
B
18