Connecting Hdtv - Single Connection For Video/Audio; Cable In; Hdmi; Ieee-1394 - Motorola DCX3400 User Manual

4 CONNECTING YOUR DCX SET-TOP
Connecting HDTV — Single Connection for Video/Audio

Cable In

Connect an RF coaxial cable to the cable wall outlet and the
DCX set-top.

HDMI

If your TV has an HDMI input, this is for both audio and video if you are using the TV
speakers. Connect a Standard HDMI cable to the TV and to the HDMI connector on your
DCX set-top.

IEEE-1394

If your HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both your
video and audio connection. Connect an IEEE-1394 cable to the IEEE-1394 connector on
your HDTV and DCX set-top.
Note: On-screen graphics will not be displayed when you are using the IEEE-1394
connection on the rear panel of the DCX set-top. Refer to
information.
If you have an audio/video receiver and are not using your TV's speakers, go to
Connecting Your DCX Set-top to an A/V Receiver –
Section 6
Audio.
13
connector on the
CABLE IN
for more