Troubleshooting - DeWalt DW709 Instruction Manual

TROUBLE!
Saw will not start
Saw makes
unsatisfactory cuts
Blade does not come up
to speed
Machine vibrates
excessively
Does not make accurate
miter cuts
WHAT'S WRONG?
Troubleshooting Guide
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
WHAT TO DO
2. Fuse blown or circuit breaker tripped 2. Replace fuse or reset circuit breaker.
4. Brushes worn out
4. Have brushes replaced by authorized service center or replace them yourself. Refer to Brushes.
2. Blade mounted backwards
2. Turn blade around. Refer to Changing or Installing a New Saw Blade.
4. Incorrect blade for work being done 4. Change the blade type. Refer to Saw Blades under Optional Accessories.
2. Low house current
2. Contact your electric company.
2. Stand or bench on uneven floor
2. Reposition on flat level surface. Refer to Familiarization.
1. Miter scale not adjusted correctly 1. Check and adjust. Refer to Miter Scale Adjustment under Adjustments.
3. Blade is not perpendicular to table 3. Check and adjust fence. Refer to Bevel Square to Table Adjustment under Adjustments.
Material pinches blade 1. Cutting bowed material 1. Refer to Bowed Material under Special Cuts.
15