Power Key; Status Led; Touch Screen - NETGEAR AirCard 810S User Manual

Power Key

Use the Power key to wake the hotspot and to power the device on and off.
Table 1. Power key usage
Desired Result
Turn on the hotspot.
Turn off the hotspot.
Wake up the Wi-Fi signal
and screen.

Status LED

The LED indicates the device's connection status.
Table 2. LED indicator patterns
Color LED pattern
Blue Slow blink
(every five seconds)
Amber Blink
(every five seconds)
Blue Double blink
(every five seconds)
Blue / Slow blink, alternating
Amber blue and amber

Touch Screen

The hotspot's touch screen displays the following information:
• Wi-Fi name and password.
• Network signal icons. See
• Data usage details.
• Wi-Fi details (number of connected devices).
• System alerts.
• Network provider message notification.
For advanced settings, use a Wi-Fi-enabled device to connect to the hotspot and then visit
the hotspot web page at
Telstra Wi-Fi 4GX Advanced III
Action
Press and hold the Power key for three seconds.
Press and hold the Power key for five seconds.
Press and quickly release the Power key.
What the pattern means
The data connection is ready for use. The Wi-Fi is on,
WWAN is connected, and Wi-Fi devices are available.
The data connection is not ready for use (disconnected or
no signal).
Data is transferring (uploading or downloading) on the data
connection.
The device is installing firmware or software updates.
Table 3 on page 4 for details.
http://m.home or http://192.168.1.1.
Get Started
3