Troubleshooting - AEG LAVATHERM 88595IS User Manual

24 www.aeg.com
12.7 Cleaning the control
panel and housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.

13. TROUBLESHOOTING

Problem
The tumble dry-
er does not op-
erate.
Unsatisfactory
drying result.
CAUTION!
Do not use furniture
cleaning agents or cleaning
agents which can cause
corrosion to clean the
appliance.
Possible cause
1)
The tumble dryer is not connected
to mains supply.
The loading door is opened.
The On/Off button was not push-
ed.
The Start/Pause button was not
pushed.
The appliance is in the standby
mode.
Incorrect programme selection.
The filter is clogged.
The Dry Plus option was in mini-
mum level.
Too high volume of the load.
The airflow grill is clogged.
Dirt on the humidity sensor in the
drum.
Incorrect remaining laundry mois-
ture degree.
The heat exchanger is clogged.
12.8 Cleaning the airflow slots
Use a vacuum cleaner to remove the fluff
from the airflow slots.
4)
Remedy
Connect in at mains socket. Check
fuse in fuse box (domestic installa-
tion).
Close the loading door.
Push the On/Off button.
Push the Start/Pause button.
Push the On/Off button.
Do the selection of the applicable
2)
programme.
3)
Clean the filter.
Change the Dry Plus option to the
moderate or maximum level.
Obey the maximum load volume.
Clean the airflow grill in the bot-
tom of the appliance.
Clean the front surface of the
drum.
Adjust remaining laundry moisture
5)
degree.
Clean the heat exchanger.
4)
3)