Setup Mode Settings - GoPro Hero 4 session Quick Start Manual

/ Multi-Shot Mode
Spot Meter
Spot Meter is good for capturing photos in a setting where the lighting
is different from where you are. Examples include capturing photos
of the outdoors from within a car or in a shaded environment while
standing in the sun. Spot Meter automatically sets the exposure based
on a single spot in the middle of the image. The options for this setting
are Off (default) and On.
Note: Changes that you make to Spot Meter in Multi-Shot settings apply only to multi-shot capture.
To adjust this setting for video capture, adjust Spot Meter in Video settings. To adjust this setting for
photo capture, adjust Spot Meter in Photo settings.
52

SETUP MODE SETTINGS

In Setup mode, you can change settings that apply to all camera
modes. To change a setting, your camera must be connected to
the GoPro App or the remote. For more information, see
Camera Settings (page 20).
When you disconnect your camera from the app or the remote, your
camera saves the settings and returns to two capture modes: Video
and Time Lapse.
/ Setup Mode
Accessing
53