Multi-Shot Capture Modes - GoPro Hero 4 session Quick Start Manual

/ Photo Mode
Spot Meter
Spot Meter is good for capturing photos in a setting where the lighting
is different from where you are. Examples include capturing photos
of the outdoors from within a car or in a shaded environment while
standing in the sun. Spot Meter automatically sets the exposure based
on a single spot in the middle of the image. The options for this setting
are Off (default) and On.
Note: Changes that you make to Spot Meter in Photo settings apply only to photo capture. To adjust
this setting for video capture, adjust Spot Meter in Video settings. To adjust this setting for multi-shot
capture, adjust Spot Meter in Multi-Shot settings.
44

MULTI-SHOT CAPTURE MODES

When you connect your camera to the GoPro App or the remote,
you can access two capture modes in Multi-Shot mode: Time Lapse
and Burst.
Capture Mode Description
Captures a series of photos at specified
Time Lapse intervals. You can use Time Lapse to capture
(default) photos of any activity, so you can choose the
best ones later.
/ Multi-Shot Mode
45