Philips 19PFL5522D Service Manual page 132

EN 8 4. LCD AUO 2K7
4.3 Model T296XW01V0 and T296XW01V3
4.3.1 Control Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Control board.
Figure 4-12 Control board location
2. Remove the four screws of the metal cover: start with the
right-down one, then the left-up, one, then the right-up one
and finally the left-down one.
Figure 4-13 Cover screws removal
3. Lift the cover from the Control board.
Figure 4-14 Lift cover
Mechanical Instructions
H_16900_002.eps
110707
H_16900_003.eps
110707
H_16900_004.eps
110707
4. Carefully disconnect the flat cable/FPCs from their
connectors.
Figure 4-15 Unplug flat cable
Figure 4-16 Unplug FPCs
5. You can now remove the Control Board.
Reassembly
To reassemble, perform all processes in reverse order.
Important: Be sure to insert the FPCs correctly: the white line
must be invisible when inserted correctly (see figure below).
Figure 4-17 Correct FPC insertion
H_16900_021.eps
110707
H_16900_020.eps
110707
H_16900_007.eps
110707