Canon EOS 1D Mark II N Software Manual

Software Guide
Contents of the CD and Structure of the Software
The CD that came with your camera contains software and Software Instruction Manuals.
EOS DIGITAL Solution Disk
Contains software for use with Canon digital cameras.
The software on the EOS DIGITAL Solution Disk operates together with the
software shown below, centering on ZoomBrowser EX.
Shows the shot image flow.
Shows the camera control information from the software.
Transfer image
w CameraWindow (Software for Communication with the Camera)
Download image
Communicates with the
camera to download to your
computer images saved on the
memory card inside your
camera, and can transfer
Download image
images to ZoomBrowser EX.
You can download multiple
images in a single operation,
display images as a list, and
download only selected
images.
Images from your card reader can also be downloaded.
Various
You can set the camera owner's name and the date and time.
camera
With the EOS-1D Mark II N and EOS 5D, you can set the Picture Style
settings
and set the Picture Style file saved on your computer to the camera.
Also, with the EOS-1D series cameras, you can register personal
functions and various shooting settings in the camera.
Together with EOS Capture, you can shoot photos remotely.
Transfer image
r EOS Capture (Remote Shooting Software)
Press the
[ Shoot ] button
Together with CameraWindow and
Various camera
ZoomBrowser EX, you can download images
settings
you have shot remotely to your computer.
You can also download the images you have
shot by pressing the camera's shutter button to
your computer.
Download image
You can control the camera from your computer
and perform various settings.
Transfer image
i Digital Photo Professional (RAW Image Editing Software)
Software recommended if you mainly shoot and
professionaly edit RAW images.
You can display and process RAW images
at high-speed.
Real-time image adjustment functions built in.
Compatible with color management systems.
Together with EOS Capture, you can shoot photos
remotely.
u WIA Driver / TWAIN Driver, PTP WIA Driver / PTP TWAIN Driver
Software that controls communication between the camera and the computer. The "WIA
Driver/PTP WIA Driver" is automatically installed with Windows XP and Windows Me, and the
"TWAIN Driver/PTP TWAIN Driver" with Windows 2000 and Windows 98SE.
Functions as software for downloading JPEG images to your computer if you use the "WIA
Driver" alone, or use the "TWAIN Driver" with a TWAIN-compatible software.
Software Instruction Manual
Contains two PDF Software Instruction Manuals.
EOS DIGITAL Software Instruction Manual Digital Photo Professional Instruction Manual
Instruction Manual for q,w,e,r,t,y,u Instruction Manual for i
CT1-1298-000
q ZoomBrowser EX (Image Viewing and Editing Software)
Software recommended if you
mainly shoot JPEG images.
You can display images as a list or
display an image in enlarged view
on a separate window.
You can classify images by the
date and time they were shot and
organize images by setting
"Rating" or "Keyword".
You can search for images by
setting conditions.
You can edit images.
You can convert and save a JPEG
image into a separate image and
export for use as wallpaper, etc.
You can print one image on one sheet of paper or print an index of your images.
You can attach an image to an e-mail and send it.
Together with all the software, you can download images from your camera and perform
settings for your camera, lay out and print images, process RAW images, shoot photos
remotely, and merge images.
Compatible with color management systems.
Lay out image and print
e PhotoRecord ( Layout Printing Software )
You can lay out and
print images selected
in ZoomBrowser EX.
You can adjust the
placement and size
of images, select
frames, add text, etc.
and print.
Select JPEG images and merge
t PhotoStitch ( Image Merging Software )
You can merge JPEG
images selected in
ZoomBrowser EX to
create panorama images,
etc.
Select RAW image and process
y RAW Image Task (RAW Image Processing Software)
You can process and display RAW images selected
in ZoomBrowser EX and change processing
parameters.
You can set the same processing parameters as the
camera or change the conditions.
You can convert and save a RAW image as a TIFF or
JPEG image.
Compatible with color management systems.
Copying and Displaying the Instruction Manuals
Copy the PDF Instruction Manuals contained on the CD to your computer.
1
Insert the CD (Software Instruction Manuals) into the CD-ROM drive of your computer.
2
Open the CD.
Click [ Start ] s [ My Computer ] ( in versions other than
Windows XP, double-click [My Computer] on the
desktop) and then double-click the CD-ROM drive
into which you have inserted the CD.
3
Drag and drop the PDF files in the [English] folder to the
desktop.
aThe PDF files will be copied to the desktop.
4
Double-click the PDF files.
aAdobe Reader starts and the Instruction Manuals are displayed.
You will need Adobe Reader to view the Instruction Manuals. Install Adobe Reader if it
is not already installed on your computer.
© CANON INC. 2005 PRINTED IN JAPAN
Installin g the Software
Check that your computer complies with the system requirements for the software and then
checkmark the checkboxes in this guide as you follow the installation procedure.
The screens used in the examples are from Windows XP.
System Requirements
ZoomBrowser EX, CameraWindow,
Software PhotoRecord, RAW Image Task, EOS Capture,
PhotoStitch, WIA Driver / TWAIN Driver
Windows XP ( Home Edition / Professional ) ,
OS
Windows Me, Windows 2000, Windows 98SE
PC with one of the above OS preinstalled and a USB port
Computer as a standard feature or an OHCI-compliant IEEE1394 port
* Upgraded machines not supported.
CPU 500MHz Pentium or higher
Windows XP, 2000 Minimum 256MB
RAM
Windows Me, 98SE Minimum 128MB
Interface USB 1.1 to 2.0 Hi-Speed or IEEE1394
ZoomBrowser EX, CameraWindow,
250MB or more
PhotoRecord, RAW Image Task
EOS Capture 300MB or more
Hard disk
space
PhotoStitch 40MB or more
PTP WIA Driver / PTP TWAIN Driver
50MB or more
WIA Driver / TWAIN Driver
Screen resolution: 1024 x 768 pixels or more Color quality: Medium ( 16 bit ) or more
Display
Installing the Software
1 Check that the camera is not connected to the
computer.
Never connect the camera to your computer before you install the software. The
software will not be installed correctly. Connect the camera to your computer in step 12.
2 Start up your computer.
Exit any programs that are running.
Insert the CD ( EOS DIGITAL
3
Solution Disk ) .
a The Installer panel appears.
Print image
Click the [ Install ] button.
4
a The [Preparing to Install] window appears and
after a brief wait, the [ Welcome to the
InstallShield Wizard for Solution Disk] window
appears.
If the dialog box that prompts you to restart your computer appears, restart your computer.
After the computer restarts, the software installation process restarts automatically.
Click the [ Next ] button.
5
Select [ Easy Installation ] and
6
click the [ Next ] button.
7 Check the details of the
License Agreement and then
click the [ Yes ] button.
Click the [ Next ] button.
8
a
Installation begins. It takes approximately 6 to 7
minutes.
Select [ Yes, I want to restart my
9
computer now ] and click the
[ Finish ] button.
a The computer restarts.
Software Guide
If you were unable to successfully install the software or if you connected the camera to
your computer before installing the software, see "Troubleshooting" in EOS DIGITAL
Software Instruction Manual.
10 Once the computer has
restarted, remove the CD.
Digital Photo Professional
Windows XP, Windows 2000
PC with one of the above OS preinstalled Set the camera's communication mode to [ PC
11
* Upgraded machines not supported.
connect. ] .
750MHz Pentium III or higher
Minimum 512MB This setting is only for EOS DIGITAL REBEL XT/350D DIGITAL and EOS 5D.
With EOS DIGITAL REBEL XT/350D DIGITAL, set the camera's power switch
< >
to ON , set [ Communication ] in menu [
turn the camera's power switch to
With EOS 5D, set the camera's power switch to
256MB or more
[ Communication ] in menu to [ PC connect. ] and then set the camera's
<
power switch to OFF
How to operate EOS DIGITAL REBEL XT/350D DIGITAL
12 Connect the camera to your computer.
Connection Procedure for EOS-1Ds Mark II and EOS-1D Mark II N
Use the bundled interface cable for connection with the IEEE1394 port to
connect your camera to your computer.
For the EOS-1D Mark II N, attach the cable protector supplied with the
camera, and then connect the dedicated cable following the steps below.
Face the < > mark on the plug to the top of the camera and then connect
the plug to the camera's
Connect the cable to the IEEE1394 port on your computer.
Never use the bundled USB interface cable. The software cannot
communicate correctly with your camera and the installation cannot be
completed correctly.
Connection Procedure for EOS DIGITAL REBEL XT/350D DIGITAL
and EOS 5D
Use the bundled interface cable to connect your camera to your computer.
Face the < > mark on the plug to the front of the camera and then connect
the plug to the camera's
Connect the cable to the USB port on your computer.
How to operate EOS DIGITAL REBEL XT/350D DIGITAL
How to operate EOS 5D
13 Set the camera's power switch to
complete installation.
How to turn on EOS-1Ds Mark II, EOS-1D Mark II N
a When the pop-up menu as right screen
appears and then disappears
automatically, the installation is complete.
For Windows 2000, Me, 98SE, a dialog box such as [Found New Hardware]
or [Building driver information database] may appear. If this is the case,
installation will be completed when the dialog box disappears.
Never set the camera's power switch to
[ Found New Hardware ] dialog box, or [ Building driver information
database] dialog box automatically disappears.
See the respective PDF Software Instruction Manual for information about how to use the
software etc.
] to [ PC connection ] and then
< >
OFF .
< ON > , set
>
.
How to operate EOS 5D
< >
terminal.
< >
terminal.
< >
ON to
How to turn on EOS DIGITAL REBEL XT/350D DIGITAL
How to turn on EOS 5D
< >
OFF until the pop-up menu,