Receiving; Monitoring; Transmitting - Motorola CP200 User Manual

RECEIVING

1 Turn your radio on.
2 Adjust the radio's volume (see page 23).
3 Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.

MONITORING

It is important to monitor traffic before
transmitting to ensure that you do not "talk
over" someone who is already transmitting.
1 Press and hold the preprogrammed
Monitor button to access channel traffic.
2 Once channel traffice has cleared, proceed
with your call by pressing the PTT button.
3 A long press of the preprogrammed Monitor
button places the radio in Sticky Monitor
mode.
•
24
English
You hear a high-pitched tone.
A short press of the Monitor button cancels
Sticky Monitor mode and returns the radio to
normal operation.

TRANSMITTING

1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
3 Hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
4 Release the PTT to listen.