Table of Contents
Advertisement
English
NOTICE:
Repeat this procedure to change the zone and
channel of the programmed button.
Short press of the programmed button changes your
current transmission to the zone and channel
programmed in this button.
Receiving and Responding to a
Radio Call
Once you have selected the required channel and/or zone,
you can proceed to receive and respond to calls.
The radio shows different indicators based on the system
the radio is configured.
•
The LED lights up solid red while the radio is
transmitting.
•
In conventional mode, the LED lights up solid yellow
when the radio is receiving a transmission.
•
In trunking mode, there is no LED indication when the
radio receives a transmission.
•
If the radio is receiving a secure transmission, the LED
blinks yellow.
60
Receiving and Responding to a
Talkgroup Call
To receive a call from a group of users, your radio must be
configured as part of that talkgroup.
When you receive a talkgroup call (while on the Home
screen) the radio displays the following depending on the
system your radio is configured to:
•
For ASTRO Conventional system, the LED lights up
solid yellow. The display shows the talkgroup alias or
ID, and the caller alias or ID.
•
For Trunking system, the display shows the caller alias
or ID.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid red.
3 Release the PTT button to listen.
See also
Making a Talkgroup Call on page 62
on making a Talkgroup Call.
for details
Advertisement
Table of Contents
