Connecting The Power Cord - Pioneer AVH-X8750BT Owner's Manual

Chapter
28

Connecting the power cord

RGB cable (supplied with Hideaway TV tuner)
Hideaway TV tuner
(GEX-1550TV (sold
separately))
Yellow
To terminal supplied with power regardless of
ignition switch position.
Red
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
White
Front speaker
White/black
Left
Green
Rear speaker
Green/black
Note
Make sure to connect the microphone supplied with this product when using Android Auto.
62
En
This product
Fuse (10 A)
Power supply
Power cord
With a two-speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Gray
Front speaker
Gray/black
Right
Violet
Rear speaker
Violet/black
4 m
Microphone
Antenna jack
Wired Remote Cable
Connect to steering wheel control interface of your
vehicle. For more details, consult your dealer.
Violet/white
Of the two lead wires connected to the back lamp, connect the one in which the
voltage changes when the gear shift is in the REVERSE (R) position. This connection
enables the unit to sense whether the car is moving forwards or backwards.
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that equipment. If not, keep the Audio Mute lead free of any connections.
Light green
Used to detect the ON/OFF status of the parking brake. This lead
must be connected to the power supply side of the parking brake
switch.
Blue/white
Power supply side
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Ground side
Parking brake
switch