Troubleshooting - Motorola i1000plus Owner's Manual

Troubleshooting

Question
I pressed the
power button, but
nothing happened.
What's wrong with
my phone?
My battery didn't
last as long as I
expected. What
can I do to extend
battery life?
The display shows
"Locked." How do
I unlock my
phone?
I tried to place a
call and received a
fast busy signal.
80
Answer
Be sure to press and hold the power button until the
display appears and you hear an audible alert. If nothing
happens, check that you have installed a battery and
that the battery is charged. For more information about
batteries and charging, see "Installing and Removing a
Battery" on page 13.
Your battery's "talk-time" and "standby-time" are
relative measurements of battery capacity. The more
you talk on the phone, the less standby-time you have,
and vice versa.
To get the most from your battery, allow it to charge
fully. To charge the battery to 100% of its capacity,
leave it in the charger for an extra hour after the
charger's light turns green.
You can also turn on the Power Save Mode feature to
extend battery life. However, the LED Power/Status
Indicator does not light when this feature is activated.
Certain features require more power and reduce battery
life. If you have selected the Automatic Display of
Individual Call Timer feature, the display uses power to
remain active during each call. Turn this feature off to
conserve battery energy. (See "Displaying the Individual
Call Timer Automatically" on page 46 for more
information.)
Use only batteries that are compatible with your phone.
Exposing your battery to extreme temperatures—below
-10°C (14°F) or above 45°C (113°F)—can shorten
battery life. Batteries are especially sensitive to high
temperature extremes. As a good rule, always take your
phone with you when you leave your car.
Enter the last three digits of your cellular number. If that
doesn't work, use the factory preset lock code: 123. If
nothing works, call your service provider (the company
that sends your monthly cellular bill). (See "Locking/
Unlocking Your Phone" on page 54.)
The cellular system did not process your call. For
example, the cellular system may be overloaded with
call attempts. To redial, press S before ending your
call attempt, or press e and try the call again later.
(See "Redialing a Number" on page 21.)