Calling Card Information - Motorola i1000plus Owner's Manual

38
Storing and Placing Numbers for

Calling Card Information

Storing Calling Card Information
You can store a calling card number sequence, with
pause characters to separate groups of numbers.
You can insert a Number Character in the sequence
to save a place for the number to be called.
See "Using Lock/Security Features" on page 52 for
information on protecting calling card information.
1. Follow the steps in "Getting to Phone Book"
on page 35 to select Store Number. You will
see Enter Number.
2. Enter the number you call to access the
calling card system. (Skip this step if you only
dial 0.)
3. Press f S. You will see Insert Wait o.
4. Press s to insert a pause (o) into the
sequence.
5. Enter the next numbers, if needed. (For
example, some long distance carriers require
you to dial a 0 first. If no further numbers are
needed, skip to step 6.)
6. Press f S.
7. Press a to scroll until you see Insert
Number 'N.
8. Press s to insert the 'N Character.
This special character saves a place for the
number you will call.
9. Press f S.
10. Press s to insert another pause character,
as in steps 3 and 4.
11. Enter your calling card PIN number.
12. Press s to store the calling card sequence.
You will see Location __.