Recalling/Viewing Calling Line Id Messages; Placing A Call To A Calling Line Id Number - Motorola ENHANCED CELLULAR TELEPHONE Owner's Manual

the oldest message is deleted, the rest of the messages are
shifted down one location, and the new message is stored
in location #1.

Recalling/Viewing Calling Line ID Messages

1. Press
RCL
until one of the following messages appears in the
display:
HH nEQW
OO nEQW
no M<ESgS (when there are no old or new messages)
2. Scroll through the messages in the message center by
pressing
backward.
3. Press
END
As you scroll through the messages, each Calling Line ID
message will be labeled with either HH nEQW (new
message) or HH Cid (old message), where HH is the
message center location number. As you view each
message, the display will cycle through the Calling Line ID
information (as shown in the following example) until you
scroll to the next message or place a call to the displayed
number.
Example 18475551212

Placing a Call to a Calling Line ID Number

After recalling the desired Calling Line ID number (the
number appearing in the display), press
call to this number.
Special System Features
and release, then press
( HH is the number of new messages)
(when there are no new messages)
to move forward and
to exit the message center.
again and hold
RCL
to move
to place a
SND
27