Advanced Memory Dialing Features
Last Number Redial
Press
SND
This feature automatically remembers the last phone
number entered from the keypad or recalled from memory,
but not actually placed (by pressing
Recalling Last Number Called
1. Press
,
RCL
number called.
2. Press
SND
Recalling Area Code and Prefix
(Postscripting)
1. Recall two-digit location number where an area code
and prefix is stored.
2. Add additional digits as needed.
3. Press
.
SND
You can append additional digits to recalled numbers by
entering them before pressing
if you often place calls to the same area code and prefix.
Turbo Dial Feature
Press and hold either of the Turbo Dial keys
through
9
Once numbers have been stored in Memory Locations 02
through 09, calls can be placed from these numbers by
pressing and holding the associated key for approximately
one second. A call will be placed to the phone number
stored in that memory location, but the number will not be
displayed. There is no need to press
NOTE Memory Location 01 is reserved for Priority
Calling (if the Priority Call feature is enabled; refer
to "Selecting and Deselecting Features" on page 31 ).
to place a call to the last number entered.
,
. The display will show the last
0
0
to place a call to this number.
for one second.
).
SND
. This is particularly useful
SND
.
SND
2
17