Turn The Leds On Or Off; Attach The Antennas - NETGEAR Nighthawk X4S R7800 User Manual

Turn the LEDs On or Off

To turn the LEDs on or off:
• Slide the LED On/Off switch on the rear panel to the On or Off position.
The Power LED stays lit even if the LED On/Off switch is in the Off position.

Attach the Antennas

The modem router comes with four antennas.
To attach the antennas:
1. To determine where to attach the antennas, match the labels on the antennas with the labels on the router.
2. Align the antennas with the antenna posts on the router.
3. Attach the antennas on the threaded antenna posts.
4. Position the antennas for the best WiFi performance.
We recommend that you position all of the antennas vertically, as shown.
Nighthawk X4S AC2600 Smart WiFi Router
Hardware Setup
12