Figure 2-136 Inserting Screws For Wall Mounting; Figure 2-137 Wrapping The Ac Adapter Cord Around The Strain Relief; Figure 2-138 Placing The Charging Unit On The Wall - NEC SL1100 Hardware Manual

SL1100
1. Insert two mounting screws as shown below. Allow about 3/16 of an inch between the wall and
screw heads for mounting the telephone.
2. Plug the AC adapter in the charging unit. Wrap the AC adapter cord around the strain relief.

Figure 2-137 Wrapping the AC Adapter Cord Around the Strain Relief

3. Place the charging unit on the posts of the wall screws and push down until it is firmly seated.
4. Plug the AC adapter into a standard 120 Vac wall outlet. Refer to
Charging Unit on the Wall on page
2-94

Figure 2-136 Inserting Screws for Wall Mounting

Figure 2-138 Placing the Charging Unit on the Wall

2-94.
ISSUE 5.0
Figure 2-138 Placing the
Installation