Makita 9526PB Instruction Manual page 6

To tighten the lock nut, press the shaft
I
lock firmly so that the spindle cannot re-
volve, then use the lock nut wrench and
securely tighten clockwise.
Lock nut
Shaft
lock
WARN I NG
:
Only actuate the shaft lock when the spindle
is
not moving.
Switch action
CAUTION :
0
Do not pull the trigger forcibly without pushing in the lock-off button.
0
Before plugging in the tool, always check to
see
that the switch trigger actuates properly
and returns to the "OFF" position when released.
To prevent the trigger from being acciden-
tally actuated, a lock-off button
i s
pro-
vided.
To s t a r t
the tool, push in the lock-off
button and then pull the trigger.
Release
the trigger to stop. For continuous opera-
tion, pull the trigger and then push in the
lock-on button. To stop the tool from the
locked position, pull the trigger fully, the
release
it.
I
I
Lock-on button
Lock-of f button
Switch trigger
2
6