Table of Contents
Advertisement
Words in boldface type are command names, commands, or default settings. Carriage
returns (Enter) are noted with <CR> or [ENTER]; this does not mean to enter these
characters literally; but instead to press the Enter key.
The communication software which should be used depends on the kind of machine that
you are going to communicate with. If you are going to call a FAX machine then you must
use the Fax software. If the machine that you are going to communicate with is a modem
then you must use a data modem communications software.
Note: This manual is written to be used for several models of Fax/Data Modems.
All the description in this manual about Caller ID, V.90 and Fax class 1 apply only
to the models which support these function.
Package Contents
The following material would be the bundle of this modem.
• Power Adapter
• Serial RS-232 Cable DB25/DB9
• Phone Cable , Type RJ11
• A CD-ROM with the INF Driver inside and a communication application
System Requirement
A host computer system should with a high speed RS-232 serial port capability of
supporting 115200 BPS is a highly recommendation. Fully data/fax/voice functionality is
only supported on system using a Intel 368 processor or higher or equivalent.
LED Indicator Specification
There are several LED light show in front of modem while the modem be powered on. And each light
would indicate the difference specification or meaning as following.
LED
Indicator
PWR
POWER -- Light when the modem has power applied.
AA
Auto Answer –When the light is on, the modem is autoanswering the incoming
call
TR
Data Terminal Ready – Lights when the host computer is ready to send or
receive data. Indicates the status of the DTR signal from computer.
OH
Off Hook – Lights when the modem is using the telephone line.
CD
Data Carrier Detect – Lights when the modem success in on line and signal to
computer.
SD
Transmit Data – Flashs when the modem are sent from the serial port of
computer to modem. At high data speeds this LED may appear always be ON.
RD
Receive Data – Flashs when data is sent from modem via serial port to
computer.
MR
At high data speeds may appear to always ON.
Description
Advertisement
Table of Contents
