Operation Condition; Before Starting Up - Makita HG5002 Instruction Manual

GB

OPERATION CONDITION

Before starting up

• As required, push-fit appropriate nozzle.
• Use extension cord of at least 1.5 mm
• The voltage rating stated on the tool should correspond to the mains voltage.
• Power cord and plug must be in perfect condition.
Starting up
Connect tool to mains supply.
10
Step-switch position
Step-switch position
Step-switch position
Step 0
2 cross-sectional.
0 : Tool is switched off
I : Tool heats to 350°C. Reduced air flow
II : Tool heats to 500°C. Maximum air flow
Step I Step II