Motorola BLINK1.1-W User Manual page 45

General What is the
significance of LED
flashing?
Connectivity I am not able to access
Issues my Camera.
Setting Up During setup on device
for Android™ and iOS,
during the last step I am
not able to find my
Camera and the setup
fails.
Help
A blinking LED indicates the following
status:
Fast blinking: Your Camera is in setup
mode. You can add the Camera to your
account in this mode. Out of the box,
the Camera is in setup mode. To reset
to setup mode, press and hold the
RESET button on the bottom of the
Camera untill you hear a long beep.
Slow blinking: The Camera is either
connecting to the router or lost the link
to the router. Please ensure that the
Camera is in the Wi-Fi
LED is stable: The Camera is
connected to the Wi-Fi
Please check if the Camera is within
®
Wi-Fi range. If the LED on your
Camera is slow blinking, please try to
move the Camera closer to the router
®
for better Wi-Fi
Please reset the Camera to setup
mode and try again. Press and hold
the RESET button on the bottom of
the Camera untill you hear a long
beep. Wait for a minute for the
Camera to restart. When the Camera
LED is blinking fast, indicating that it is
in setup mode. Now restart the setup
from your Smartphone again.
®
signal range.
®
network.
range and try again.
45