General Characteristics Wd - Electrolux TC2 Service Manual

3.1.2

General characteristics WD

Version
TC4
No. buttons
No. of LEDs
Programme selector
Serial port
Power supply voltage
Washing type
Rinsing system
Motor
Spin speed
Anti-unbalancing system
Water fill
Detergent dispenser
Control of water level in the
tub
Door safety interlock
Heating element heat output,
washing
Heating element heat output,
drying
Temperature control,
washing
Temperature control, drying
Buzzer
Sensors
SOI/DT 2010-03 dmm
maximum 5 (4 options + 1 start/pause)
maximum 14 + LCD display
15-21 positions with main switch (incorporated in the PCB)
DAAS-EAP communication protocol up to 115,200 baud
220/240V
50/60 Hz (configurable)
Traditional with "Eco-ball" sphere
Jet-System
Traditional with "Eco-ball" sphere
Jet-System
Collector, with tachometric generator (Universal)
Two-pole asynchronous, with three-phase tachometric generator
(with Inverter)
600 ÷ 1,600 rpm
FUCS (for universal motors)
AGS (for asynchronous motors with Inverter)
1 solenoid valve with 1 inlet – 2 or 3 outlets
3 compartments: pre-wash/stains, wash, conditioner
4 compartments: pre-wash, wash, conditioner, (bleach)
Electronic/analogue pressure switch
Traditional (with PTC)
Instantaneous
1950W with thermal fuses incorporated
1840W (920+920)
NTC sensor incorporated in the heating element
NTC probe
Thermostats
Traditional incorporated in the PCB
Water fill gauge (flowmeter)
Aqua control
7/78
599 72 84-41