4.1.2
General characteristics WD
Version
TC3
(TIME MANAGER)
Version
TC3
(PROPORTIONAL)
Number of buttons
Number of LEDs
Programme selector
Serial port
Power supply
Type of washing
Rinsing system
Motor
Spin speed
Anti-unbalancing system
Water fill
Detergent drawer
Control of water level in the
tub
Door safety device
Power of heating element
washing
Power of heating element
drying
Washing temperature control
Drying temperature control
Buzzer
Sensors
SOI/DT 2007-06 dmm
Max. 8 (5 options + 1 start/pause + 2 for time driven)
Max. 18 + LCD display
15-21 positions with main switch (incorporated in the PCB )
DAAS-EAP communications protocol up to 115.200 baud
220/240V
50/60 Hz (configurable)
Traditional with "eco-ball" sphere
Jet-system
Traditional with "eco-ball" sphere
Jet-system
Collector, with tachometric generator (Universal)
Two-pole asynchronous, with three-phase tachometric generator
(with Inverter)
600 ÷ 1600 rpm
FUCS
1 solenoid valve with 1 inlet – 2/3 outlets
3 compartments: prewash/stains, wash, conditioners
4 compartments: prewash/stains, wash, conditioners, bleach
Electronic/analogue pressure switch
Traditional (with PTC)
Instantaneous
1950W with thermal fuse incorporated
1840W (920+920)
NTC sensor incorporated in the heater
NTC sensor
Thermostats
Traditional incorporated in the electronic board
Water fill gauge (flowmeter)
Aqua control
13/75
599 38 94-46