Makita 6226DW Instruction Manual page 5

Specific Safety Rules
USBOZZ-l
1. Hold tool by insulated gripping surfaces when performing an operation where
the cutting
tool
may contact hidden wiring. Contact
with
a "live" wire
will
also make exposed metal parts of the tool "live"
and
shock the
operator.
2.
Be aware that this tool is always in an operating condition, because it does
not have to be plugged into an electrical outlet.
3.
Always be sure you have a firm footing.
4. Be
sure no one is below when using
the tool in
high locations.
5.
Hold the tool firmly.
6. Keep hands away from rotating parts.
7.
Do
not leave
the
tool running. Operate
the
tool only when hand-held.
8.
Do not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SYMBOLS
The followings
show
the
symbols used for
tool.
v
.................................
volts
-
----
.................................
direct current
n,
.................................
no load speed
..Jmin
................................
revolutions
or
reciprocation
per
minute
5