Setting.squelch; S/Rf.meter; External.speaker - Cobra 29 LX How To Use Manual

Operation
Setting Squelch
Continued
Gate set to Desired
Squelch Setting (DSS)
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
3 . . T o.achieve.the.Desired.Squelch.Setting.(DSS),.
NOISE
S/RF Meter
S/RF Meter
This.meter.swings.proportionately.to.the.RF.
output.(outgoing.signal).while.transmitting..
1 . . . T he.S/RF-SWR-CAL.button.must.be.in.the.
30
turn.the.Squelch.control..counterclockwise.
until.you.hear.noise...Now.turn.the.control.
clockwise.just.until.the.noise.stops...This.is.the.
DSS.setting.
S/RF.mode.
External Speaker
The.external.speaker.jack.is.used.for.remote.
receiver.monitoring.
1
. . C onnect.an.external.speaker.to.the.external.
speaker.jack.on.the.rear.panel..
Operation
External Speaker
Note
The external speaker should
have 8-ohm impedance and
be rated to handle at least 4.0
watts. When the external speak-
er is plugged in, the internal
speaker is automatically discon-
nected. See accessory page 41.
Note
Cobra external speakers are
rated at 10 watts.
31