Setting.display.color.mode; Setting.brightness.mode; Setting.contrast.mode - Cobra 29 LX How To Use Manual

Operation
Setting Display Setting Display Color Mode
Color Mode
1
Press.Menu/Enter.knob.and.scroll.down.to.select.
Display Color..
NB/ANL
2
2 3
NB/ANL 1.5
CAL
SWR TX
ANL
RX
S/RF
S/RF
RF
SWR
CAL
3 5 7 9
1
SIG +30dB
SWR /CAL
Press.and.release.Menu/Enter to.set.the.color.
VOL SQ DYNAMIKE
3
OFF MIN
Rotating.Menu/Enter.knob.clockwise.changes.the.
display.color.from.green.to.blue.to.amber.to.red.
then.back.to.green..
NB/ANL
4
Note
2 3
1.5
NB/ANL CAL
SWR
TX
ANL
Select EXIT to return to
RX
S/RF
S/RF
RF
main menu. Press Dim/Escape
SWR
CAL
button to return to CB mode. 5 7 9
3
1
SIG +30dB
SWR /CAL
Press.Menu/Enter.knob.or.escape.button.again.
VOL SQ DYNAMIKE
to.exit.routine...
OFF MIN
CH 9/
WX AUTO SCAN SCAN
DISPLAY COLOR MEM SCAN
BRIGHTNESS
MEM WX !
RF GAIN DELTA TUNE T BACK
MIN MAX OFF
TURN CH KNOB TO SCAN
MEM SCAN
SET COLOR
EXIT
MEM WX !
RF GAIN DELTA TUNE T BACK
MIN MAX OFF
Setting Brightness Mode
Press.Menu/Enter.knob.to.select.Set Brightness
Rotate.Menu/Enter.knob.clockwise.to.Select
Brightness..Press.Menu/Enter.knob.to.select.
Day-Bright..Turn.Menu/Enter.clockwise.to.
increase.brightness.and.turn.counter-clockwise.to.
decrease.brightness..
19
ESC
SWR
CAL
To.set.the.day.bright.level,.turn.the.Menu/Enter.
knob.clockwise.to.a.desired.setting.and.then.
press.Menu/Enter. To.set.the.Night-Dim level,.
repeat.instructions.above.then.select.Night-Dim.
TURN CH KNOB TO
SET LEVEL
Press.Menu/Enter.knob.again.to.exit.routine..
Setting Contrast Mode
CH 9/
19
Press.Menu/Enter.knob.and.rotate.clockwise.to.
select.Set Contrast...Press.Menu/Enter.knob.
again.and.rotate.clockwise.to.increase.contrast,.
ESC
counter-clockwise.to.decrease.contrast..
SWR
Press.Menu/Enter.knob.to.set.contrast..
CAL
TURN CH KNOB TO
SET CONTRAST
Press.Menu/Enter.knob.again.to.exit.routine..
Operation
Setting
Brightness
Mode
Note
If an attempt is made to
exceed the highest or lowest
brightness levels, 1 error beep
will be heard.
Note
Exit will return to menu mode.
ESC will exit and return to CB
Standby.
Note
To select day or night levels,
press and release Dim/Escape
button once levels are set.
Note
To toggle from day to night
settings, see page 24.
Setting
Contrast Mode
Note
If an attempt is made to
exceed the highest or lowest
contrast levels, 1 error beep will
be heard.