Set Up And Sync Your Cameras - NETGEAR arlo User Manual

¾ To register for an Arlo account:
1. In a browser, enter
2. Click or tap New System Setup.
3. Complete the required fields.
4. Click or tap Continue.
5. Choose your base station's serial number from the drop down menu.
Note:
If the serial number is not listed, you can enter it manually. The serial number is on
the bottom of the base station, on the product label.
6. Click or tap Continue.
7. Choose your time zone from the drop‑down menu.
8. Click or tap Continue.
9. Choose a service plan.
Note:
For more information, see
Your Arlo account is set up.

Set Up and Sync Your Cameras

After the base station is setup and you registered for an Arlo account, you are
ready to set up your cameras and sync them to the base station. The Basic service
plan supports up to five synced cameras. You can upgrade to a paid service plan to
support more cameras.
¾ To set up your cameras:
1. Slide and hold the latch on the bottom of the camera.
https://arlo.netgear.com/
Service Levels
6
in the address bar.
on page 33.