Draytek Vigor3900 User Manual page 344

3. The following dialog will appear. Click the Basic tab to configure the settings.
Available parameters are listed as follows:
Item
Profile
Enable
Type
Basic
Description
Type the name of the profile.
Check this box to enable this profile.
There are three types offered here for you to choose. Please
choose IPSec for this case.
Always On – Click Enable to make router always keeping
connection.
For Remote Dial-In User- Click Enable to allow the
connection via IPSec remote dial-in host.
Dial-Out Through- Choose a wan profile to be used by such
profile.
Failover to – Choose a wan profile which will lead the data
passing through other WAN automatically when the selected
WAN interface (in Dial-Out Through) is failover.
Local IP/Subnet - Type the IP address and subnet mask of
local host.
Local Next Hop - Specify the gateway for WAN interface.
Usually, use the default setting (leave it in blank).
Remote Host - Type the WAN IP address for the remote
host.
Remote IP / Subnet Mask - Type the LAN IP address and
LAN subnet mask for the remote host.
More Remote Subnet – Add more remote subnet in this
field if required.
336
Vigor3900 Series User's Guide