Makita 1804N Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Planer
  5. 1804N
  6. Instruction manual
Makita 1804N Instruction Manual

Makita 1804N Instruction Manual

Hide thumbs Also See for 1804N:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Power Planer
1804N
013228
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita 1804N

Summary of Contents for Makita 1804N

  • Page 1 INSTRUCTION MANUAL Power Planer 1804N 013228 IMPORTANT: Read Before Using.

  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model 1804N Planing width 136 mm Planing depth 3 mm No load speed (min 16,000 Overall length 445 mm Net weight 7.8 kg • Due to our continuing program of research and development, the specifications herein are subject to change without notice.

  • Page 3: Planer Safety Warnings

    reduces the risk of electric shock. 21. Store idle power tools out of the reach of 10. Use of power supply via a RCD with a rated children and do not allow persons unfamiliar residual current of 30mA or less is always with the power tool or these instructions to recommended.

  • Page 4: Functional Description

    To adjust the depth of cut, turn the knob on the front of cause vibration and shorten tool life. the tool. 17. Use only Makita blades specified in this Switch action manual. 18. Always use the correct dust mask/respirator 1.
  • Page 5 For the correct planer blade setting Use only the Makita wrench provided to remove or • Your planing surface will end up rough and uneven, install the blades. Failure to do so may result in unless the blade is set properly and securely.

  • Page 6: Correct Setting

    (A) Front base (Movable shoe) (B) Rear base (Stationary shoe) Although this side view cannot Correct setting show it, the edges of the blades run perfectly parallel to the rear base surface. Cause: One or both blades fails to Nicks in surface have edge parallel to rear base line.

  • Page 7: Replacing Carbon Brushes

    To maintain product SAFETY and RELIABILITY, repairs, (C) and (D). Then tighten the wing nuts. any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 004953 Immerse the dressing stone in water for 2 or 3 minutes before sharpening.
  • Page 8 Makita Corporation www.makita.com 883003D7...

Table of Contents