Onboard Devices Configuration - Asus Terminator 2 Barebone System T2-P User Manual

5.4.3 Onboard Devices Configuration

OnBoard AC'97 Audio
OnBoard LAN
OnBoard LAN Boot ROM
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
EPP Version
ECP Mode DMA Channel
Parallel Port IRQ
OnBoard Game Port
Onboard MIDI Port
OnBoard AC'97 Audio [Auto]
[Auto] allows the BIOS to detect whether you are using any audio device. If
an audio device is detected, the onboard audio controller is enabled; if no
audio device is detected, the controller is disabled.
Configuration options: [Auto] [Disabled]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the option ROM in the onboard LAN
controller. This item appears only when the Onboard LAN item is set to
Enabled. Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.Configuration options:
[Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [378] [278] [3BC] [Disabled]
Parallel Port Mode [EPP+ECP]
Allows you to select the Parallel Port mode.
Configuration options: [EPP+ECP] [Normal] [Bi-directional] [EPP] [ECP]
108
[Auto]
[Enabled]
[Disabled]
[3F8/IRQ4]
[378]
[EPP+ECP]
[1.9]
[DMA3]
[IRQ7]
[Enabled]
[Disabled]
Chapter 5: BIOS setup