Table of Contents
Advertisement
Place the bowl on a flat surface and using
both hands, remove the gasket by sliding
it upwards in the direction shown by the
arrow (Fig 16)
Wash the disassembled bowl and components with a sanitising detergent solution, rinsing thoroughly
with clean hot water.
Before reassembling the bowl ensure the gasket seal is positioned correctly
Moisten the gasket seal with water and fit the bowl back into place.
DO NOT USE LUBRICANT.
Warning: make sure that the bowl is correctly fitted to the machine; an incorrectly fitted bowl will
cause the product to leak out with risk of scalding!
Reassemble the bowl, rod and mixing paddle by reversing the disassembly instructions
Advertisement
Table of Contents
