Functional Description; Installing Or Removing Battery Cartridge; Adjusting Depth Of Cut - Makita 1050D Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Button
2. Battery cartridge
1
2
3
1. Pointer
2. Scale
3. Knob
1
1. Lock-off button
2. Switch trigger
CAUTION:
• Always be sure that the tool is switched off and the battery cartridge is
removed before adjusting or checking function on the tool.

Installing or removing battery cartridge

002544
• Always switch off the tool before insertion or removal of the battery
1
cartridge.
2
• To remove the battery cartridge, withdraw it from the tool while pressing
the buttons on both sides of the cartridge.
• To insert the battery cartridge, align the tongue on the battery cartridge
with the groove in the housing and slip it into place. Always insert it all
the way until it locks in place with a little click. If not, it may accidentally
fall out of the tool, causing injury to you or someone around you.
• Do not use force when inserting the battery cartridge. If the cartridge
does not slide in easily, it is not being inserted correctly.

Adjusting depth of cut

002547
The depth of cut can be adjusted in 0.1 mm increments within a range of
0 - 0.5 mm. Turn the knob on the front of the tool until the pointer is aligned
with the desired cutting depth on the scale.
CAUTION:
• The knob can be turned beyond the 0.5 mm graduation. However, do not
operate the tool with a depth of cut more than 0.5 mm The motor may be
burned out or the battery cartridge may be damaged.
Switch action
002551
CAUTION:
• Before inserting the battery cartridge into the tool, always check to see
that the switch trigger actuates properly and returns to the "OFF" position
2
when released.
To prevent the switch trigger from being accidentally pulled, a lock-off button is
provided.
To start the tool, depress the lock-off button and pull the switch trigger.
Release the switch trigger to stop.
5