1. Manuals
  2. Brands
  3. Makita Manuals
  4. Planer
  5. 1050D
  6. Instruction manual

Makita 1050D Instruction Manual

Cordless power planer
Hide thumbs Also See for 1050D:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Cordless Power
Planer
MODEL 1050D
002540
I N S T R U C T I O N
M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Advertisement

Table of Contents
loading

Related Manuals for Makita 1050D

Summary of Contents for Makita 1050D

  • Page 1 Cordless Power Planer MODEL 1050D 002540 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    The noise level under working may exceed 85 dB (A). – Wear ear protection. – The typical weighted root mean square acceleration Director value is not more than 2.5 m/s MAKITA INTERNATIONAL EUROPE LTD. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND SAFETY INSTRUCTIONS ENA002-2...
  • Page 3 17. Stay alert. mended when working outdoors. Wear protecting hair covering to contain long hair. Watch what you are doing. Use common sense. Do Use protective equipment. not operate the tool when you are tired. Use safety glasses and if the cutting operation is 18.
  • Page 4 15. When leaving the planer, switch off and set it 18. Use only Makita blades specified in this manual. with the front base up on a wooden block, so that the blades do not contact anything.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 002544 • Always switch off the tool before insertion or removal of the battery cartridge.

  • Page 6: Removing Or Installing Planer Blades

    • Use only the Makita wrench provided to remove or install the blades. Failure to do so may result in overtightening or insufficient tightening of the installation bolts. This could cause an injury.
  • Page 7 For the best results, empty the dust bag when it becomes about half full. Remove the dust bag from the tool and pull out the fastener. NOTE: • If you connect a Makita vacuum cleaner to this tool, more efficient and cleaner operations can be performed. 1. Dust bag 2. Nozzle 3.

  • Page 8: Planing Operation

    You may wish to add to the length of the fence by attaching an extra piece of 002574 wood. Convenient holes are provided in the fence for this purpose. OPERATION Planing operation 002576 First, rest the tool front base flat upon the workpiece surface without the blades making any contact.

  • Page 9: Maintenance

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 10 Memo...
  • Page 11 Memo...
  • Page 12 Makita Corporation 884218B225...

Table of Contents