Connector Board - NEC Versa LXi Service And Reference Manual

4. Turn the main board over.
5. Lift the CPU assembly up and away from the main sub-board to disconnect it from
connector P8. Remove the CPU board assembly.

Connector Board

Use the following procedure to remove the connector board from the system.
1. Remove the keyboard, front cover, top cover, LCD panel, Mini-PCI LAN/modem (if
present), audio board, and main board from the system.
Locate and remove the two screws securing the PC card assembly bracket. Remove the
2.
bracket.
3. Locate and remove one screw securing the diskette drive bracket.
3-28 Disassembly and Reassembly
Removing the PC card bracket screws
A – Screw
Removing the diskette drive bracket screw
A – Screw