Honeywell LXL-1000 User Manual page 35

Scheduling
5.
7.
8.
9.
10. Select the randomize option, if desired.
www.PDF-Zoo.com
(cont'd
For event number "02," enter the access group number.
Otherwise, this prompt is skipped.
Press [∗] to continue to the "Start" prompt below.
Enter the event's start time and days of week.
Hour = 00-12; minute = 00-59
AM = 0; PM = 1
Days = Position the cursor under the desired days using
the [∗] key to move forward, then press "1" to select the
day.
Press [∗] to continue.
Enter the event's stop time, AM/PM and days of week.
Refer to step 7 for available entries.
Press [∗] to continue.
Enter the desired repeat option.
0 = no repeat
1 = repeat schedule weekly
2 = repeat schedule biweekly (every other week)
3 = repeat schedule every third week
4 = repeat schedule every fourth week
e.g., To make a schedule that happens everyday you
would select all days with a repeat count of 1. To make a
schedule that runs for one week then stops, select
everyday with a repeat count of 0.
0 = no; 1 = yes
If selected, the schedule times will vary within 60
minutes of the "hour" time. For example, if a schedule is
set to start at 6:15pm, it will do so the first time 6:15pm
arrives, but on subsequent days it will start anytime
between 6:00 and 6:59 p.m.
Press [∗] to continue.
)
GROUP NUMBER
X
START SMTWTFS
HH:MMAM 1000000
STOP SMTWTFS
HH:MMAM 1000000
REPEAT OPTION
0-4 X
RANDOMIZE
= =
0 NO 1 YES X
– 35 –