Chassis Assembly Disassembly - Motorola GP88s Service Manual

Radio Disassembly — Detailed
8. Unplug the wires from the 4-pin connector.
6.2

Chassis Assembly Disassembly

Use a TORX™ screwdriver with a T6 head to remove the four screws holding the main board to the
chassis.
1. Lift the main board from the chassis (See Figure 4-5).
CAUTION: Refer to the CMOS CAUTION paragraph on page 2 before removing the main board. Be sure
Pos
to use ESD protection when handling circuit boards.
Wire Assembly
4-Pin Connector
Figure 4-4 Unlatch Flex Connectors
O-Ring
Retaining Features
Figure 4-5 Remove Main Board from Chassis
Jumper Flex
Latch
Main Board
Radio Chassis
4-7