Chassis Assembly Disassembly - Motorola MTP700 Basic Service Manual

6 - 8

Chassis Assembly Disassembly

1. Use a TORX™ screwdriver with a T6 head to remove the five screws holding the
2. Lift the secondary shield and main board from the chassis (See Figure 6-5).
CAUTION: Refer to the CMOS CAUTION paragraph on page 3 before removing the main board. Be sure
!
to use ESD protection when handling circuit boards.
3. Remove the eight small O-ring retainers from their slots in the chassis. Note the
4. Remove the O-ring.
MTP700/MTP750 Portable Radios / Basic Service Manual
secondary shield and main board to the chassis.
O-Ring
Retaining
Features
Figure 6-5 Remove Main Board from Chassis
alignment of the retainers for reassembly.
Secondary Shield
Main Board
Radio Chassis
MAINTENANCE