Battery Cleaning, Storage And Service; Cleaning; Storage; Service - Honeywell HX3 User Manual

Hide thumbs Also See for HX3:
Table of Contents

Advertisement

Battery Cleaning, Storage and Service

Cleaning

The battery pack should not require cleaning unless it has become heavily soiled. Old or damaged batteries should be disposed
of promptly and properly. The best way to dispose of used batteries is to recycle them. Battery recycling facilities recover the
Nickel, Lithium or Lead from old batteries to manufacture new batteries.
Use only mild detergent with a slightly damp cloth to clean the outside of the battery. Do not use solvents or flammable
cleaners. Allow the case to dry fully before using again.
Do not allow cleaning agents of any kind to contact the charging contacts; they may be damaged. If necessary, clean them
with a soft-bristle, dry brush or compressed air.

Storage

Battery packs should be stored, charging contact side up, in a cool dry place, protected from weather and airborne debris,
whenever possible.
Do not store battery packs in direct sunlight, on a metal surface, or anywhere the battery pack cannot cool down.
Do not leave the battery pack in a non-operating charger. The battery pack may discharge through the charger rather than hold
its charge.
Note:
Battery packs may leak up to 1 mA current through the battery contacts when left in an unpowered charger pocket.

Service

There are no user serviceable parts in the Lithium Ion Battery Pack. Contact
Technical Assistance
for battery disposal and
replacement options.
1-15

Advertisement

Table of Contents
loading

Table of Contents