Configuring The Local Phone Book And Speed Dials - Cisco 7925G Deployment Manual

The Cisco Unified Wireless IP Phone 7925G defaults with network profile 1 configured with an ssid "cisco" and open
authentication. DHCP option 150 can be configured for that network to point to an alternate TFTP server containing the
WLAN template file.
If using 802.1x authentication (EAP-FAST or LEAP) where unique user accounts are utilized, then can either push out a
temporary username and password, which can be disabled after the grace period, and the users must update their username and
password information or push out a template where the username and password is blank.
PEAP and EAP-TLS are not supported with the 7925 Configuration Utility at this time.
After pushing out the default WLAN template, remove the template from the TFTP server afterwards if the production voice
network is using the same TFTP server to avoid from overwriting the current wireless LAN and network settings. If using a
different TFTP server, may still want to remove the file to ensure that not just any Cisco Unified Wireless IP Phone 7925G can
get on the wireless network.

Configuring the Local Phone Book and Speed Dials

The Cisco Unified Wireless IP Phone 7925G contains local phone book and speed dials support.
Up to 100 contacts and 99 speed dials can be added. Key #1 is reserved for voicemail.
The left softkey on the home screen can be programmed for "Message" to access voice mail or to "PhBook" to access the local
phone book.
The local phone book and speed dials can be configured via the local keypad or via the Cisco Unified Wireless IP Phone 7925G
web interface. Since the web password is not managed by the user the web interface is primarily intended for use by the system
administrator, where they can upload information into the phone book for the user. This requires that the "Phone Book Web
Access" product specific configuration item be set to "Allow Admin".
Cisco Unified Wireless IP Phone 7925G Deployment Guide 79