Change Power Control - Cisco AT6400 User Manual

After you press the ENTER key, the channel key now controls the device associated with the mode
key you select. For example, in TV mode, the channel key controls the TV, but in STB mode, the
channel key controls the Set Top Box.
NOTES:
• If any other key is pressed, except the Mode keys and the ENTER key, the remote does not
accept any changes or updates. The STB mode key displays a long red flash and the remote
returns to normal operation.
• If the remote times out before you complete programming channel selection control, the
remote does not accept any changes. You must start over from step 1 of this procedure.

12. CHANGE POWER CONTROL

The POWER key on the remote is set by default to control the power switch on one device at a time,
in either mode (STB, TV, DVD, or AUX). When in STB mode, the remote switches the Set Top Box from
OFF (standby mode) to ON, or from ON to OFF (standby mode). However, you can alternatively
program the POWER key to control the power switch on up to four devices at the same time, instead
of controlling one device at a time. It is highly recommended that you set up the POWER key to turn
on and off your Set Top Box and your TV at the same time. Turning off the Set Top Box saves electricity
and extends the life of the box. When turned off, the Set Top Box can still record scheduled programs
on its DVR and perform any other necessary functions.
CONTROLLING POWER FOR MULTIPLE DEVICES AT ONCE (Program Code 977)
1. Press and hold the STB key on the remote.
2. Without releasing the STB key, press and hold the OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 977 by pressing the numeric keys on the remote. The STB mode
key blinks twice to indicate a successful entry.
5. For the first device, press the STB key. The STB mode key blinks twice.
6. For the second device, press the applicable mode key (TV, DVD, or AUX). The selected mode
key blinks twice.
7. Repeat step 6 for up to two more devices (total of four devices).
8. Press the ENTER key to complete the power switch control programming. The last selected
mode key blinks 3 times to indicate a successful entry.
Example: If you press only TV in steps 6 and 7, the POWER key controls both the Set Top Box and the
TV at the same time, regardless of which mode the remote is in (STB, TV, DVD, or AUX).
CONTROLLING POWER FOR ONE DEVICE AT A TIME (Program Code 977)
Complete steps 1 through 4 of the Controlling Power for Multiple Devices at Once procedure.
Press the ENTER key to complete the power switch control programming. The last selected mode key
blinks 3 times to indicate a successful entry.
UNIVERSAL REMOTE CONTROL
9