Reassign Mode Keys - Cisco AT6400 User Manual

UNIVERSAL REMOTE CONTROL
1. = VCR
2. = Receiver/Tuners
3. = Amplifiers
4. = HTIB (Home Theater in a Box)
7. Point the remote toward the device, and press PLAY.
8. Your device powers off when it finds the correct code. Then choose one of the following
options:
• Save code and exit – Press the ENTER key on the remote to program the code in the
remote and the mode key flashes three times indicating successful entry.
• Step forward – Press the fast-forward (FF) key on the remote to step ahead through the
codes one at a time. Then, return to step 7.
• Step backward – Press the rewind (REW) key on the remote to step back through the
codes one at a time. Then, return to step 7.
• Exit without saving the code – Press the EXIT key on the remote. The selected mode key
flashes three times and returns to normal operation.
• Send the current code – Press the POWER key on the remote to send the current code. If
the device turns back on, press the ENTER key. If the device does not turn on, return to
step 7.
• Continue with auto-search function – Press the PLAY key on the remote to continue with
the auto-search function. Then, return to step 7.

9. REASSIGN MODE KEYS

You can reassign a mode key to operate a different device. For example, you can reassign the AUX
key to operate a DVD player or a TV. If you reassign a key, be sure you update the table found on
page 38.
REASSIGNING MODE KEYS (Program Code 944)
1. Press and hold the STB key on the remote control.
2. Without releasing the STB key, press and hold the OK key.
3. Release both keys and all mode keys blink twice.
4. Enter the programming code 944 by pressing the numeric keys on the remote. The STB key
blinks twice indicating a successful entry.
5. Press and release the mode key associated with the type of device you want to control, and
then press and release the mode key that you want to change. The newly assigned mode key
blinks one time indicating a successful entry.
6